Jeremy Thompson

Hi! Thanks for your interest in scheduling your project work with J.T. Unique.

Please use the calendar below to find an appointment time to drop off your project materials. Turn around times for most projects are 48 hours or less (unless otherwise noted by craftsmen during drop-off).

    • Home Build Consultation

      30 minutes

    • Production Consultation

      30 minutes

    Shop Services

    • Straightline Service ($25 Minimum)

      1 hour

      Up to 16’ 6” length, 48” width 2 1/4” thick Softwoods under 1,000/ln ft. & Hardwoods $0.25/ln ft for 1” thick $0.30/ln ft for 1”-1 3/4” thick $0.35/ln ft for 1 3/4” - 2/14” thick 1,000ft. minimum. 1” thick softwoods only $0.15/ l ...

    • Edge Milling (Jointing) ($25 Minimum)

      1 hour

      Up to 7” wide (planer) - $1/minute

      +7” wide (router) - $0.35/ln ft

    • Thickness Planing ($25 Minimum)

      1 hour

      $1/minute (shop rate will kick in after 1 hour)

    • Brush/Wire Wheel Sanding ($100 Minimum)

      1 hour

      $0.50/ln ft

    • Solid Wood Panel Boards ($35 Minimum)

      1 hour

      Thickness Planing - $1/minute (shop rate will kick in after 1 hour)

      Glue Joint (Shaper) - $0.35/ln ft

      Glue & Clamp (includes glue) - $1/ln ft

      Surface Clean - $1/minute (shop rate will kick in after 1 hour)

    • Small Part Powder-Coating

      1 hour

      $35 set-up fee

      $15/piece (pieces must fit in 16x20 or smaller oven)

    • Raised Panel Cabinet Doors & Wainscotting

      1 hour

      $1.50/united inch (height+width) (material not included)

    • 3-D Project Design

      1 hour @ $75.00